RaceFlux Push-Lock Rubber Hose Union / Coupler
Part #
PLL-XX
Part # PLL-XX
Customers Also Bought
These push-lock union fittings are used to join two rubber hoses together.
Push-lock fittings are for use with soft rubber hose or "socketless" hose. Hose and fittings are easy to install: they simply push on with some heat and lubricant, and "lock" in place.
Fittings are black anodized aluminum. Assembled hose is rated for up to 300°F and 150-300 psi (depending on hose size) when used with RaceFlux PH series hoses. Hose clamps are required to ensure the hose does not back off if used at pressures of 10 psi or higher.
Features and Benefits
- Easy to assemble push-lock style fitting for RaceFlux PH series hose, or other rubber fuel, transmission, and PCV hose.
- Lightweight black anodized aluminum.
- 36% lighter than traditional screw-type line fittings.
| Part # | PLL-XX |
|---|---|
| Brand | RaceFlux |
| Compatible Fittings | PL (Push-Lock Barb) |
| Compatible Hose | PH (Push-Lock) |
| Color | Black |
| Primary Material | 6061-T6 aluminum |
| Finish | Anodized per ISO 7599 |
| Fitting Angle | Straight |
| Connection Type | Hose Barb Push-Lock |
| Connection A Type | Push-Lock |
| Connection A Gender | M |
| Connection B Type | Push-Lock |
| Connection B Gender | M |
| Maximum Operating Temperature | 302°F (150°C) |
| Minimum Operating Temperature | -40°F (-40°C) |
| Swivel | None on installation only |
| Applications | Breather and vent lines Fuel (in-tank) Fuel (outside of tank) Gauge and sensor lines High pressure applications High temperature applications Hydraulics: low pressure (return lines) Vacuum lines Coolant & water lines Other oil water and air systems |
| Fluid Compatibility | Air and gas Alcohol Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitromethane Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |
| Standards & Certifications | Anodizing per ISO 7599 |
Write Your Own Review
Related Products
You May Also Like
