Remote Oil Filter Take-Off Adapter Plate
From $99.00
To $124.70
Part #
ENV-164
Free shipping on USA orders over $99
- Replaces your oil filter to allow for the installation of a remote oil filter system.
- Features two 1/8" NPT ports for sensors or turbo feed lines.
- Standard -10AN O-ring boss ports are used for the inlet and outlet and optional adapter fittings are available for -8AN, -10AN and -12AN.
- Robust square profile Viton O-ring for a reliable seal.
- Made in USA. Lifetime warranty.
Part # ENV-164
Improved Racing's remote take-off plate replaces your oil filter to allow for the installation of a remote oil filter system.
This compact, high-flow spin-on adapter is available in four oil filter thread sizes for compatibility with most vehicles. It features two 1/8" NPT ports for a pressure or temperature sensor. High-flow female -10AN O-ring boss ports are used for the inlet and outlet and optional adapter fittings are available for -8AN, -10AN and -12AN lines. The Viton O-ring has a square profile, which maximizes sealing surface.
Remote oil filter systems allow for convenient access to your filter and permit the use of larger, higher-flowing oil filters. Please note a remote oil filter head is required when using this take-off adapter. Improved Racing thermostatic and non-thermostatic remote oil filter heads are available separately.
Features and Benefits
- CNC-machined from lightweight aluminum, Type II black anodized, laser-marked
- 2 x 1/8" NPT sensor ports
- Two female -10AN O-ring boss fitting ports
- Robust square profile Viton O-ring for a reliable seal
Technical Specifications
- Filter thread: Available in 3/4"-16, 13/16"-16, M20x1.50, and M22x.150
- Fitting Ports: 2 x -10AN SAE J1926 / MS16142 O-ring boss
- Material: 6061-T6 aluminum
- O-ring inner diameter: 2.484"
- O-ring outer diameter: 2.762"
- Sensor Ports: 2 x 1/8” NPT
- Plating: MIL-A-8625 Type II black anodized and laser-marked
- Weight: 6 oz (170g)
Dimensions
Includes
- 1x Universal billet remote oil filter take-off plate
- 1x Square Viton O-ring
- 2x 1/8" NPT plugs with thread sealant
Optional Adapter Fittings Available in -6AN, -8AN, -10AN, or -12AN
Applications
- Fits filter pedestals for filters up to 2.8" in gasket outer diameter.
- Compatible with oil filter nipples up to 0.8" (20.3 mm) in length.
Be sure to check the filter thread for your vehicle before ordering. Guidelines for common applications are listed below.
| Application | Thread Size |
|---|---|
|
3/4-16 |
|
M20x1.50 |
|
13/16-16 |
|
M22x1.50 |
| Part # | ENV-164 |
|---|---|
| Brand | Improved Racing |
| Primary Material | 6061-T6 aluminum |
| Finish | Type II Anodized |
| Color | Black |
| Inlet Port Size | -10AN O-Ring Boss Female |
| Outlet Port Size | -10AN O-Ring Boss Female |
| Maximum Operating Pressure | 350 psi (24.13 bar) |
| Max Recommended Flow Rate | Up to 20 GPM (76 LPM) |
| Fluid Compatibility | Air and gas Alcohol Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitromethane Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |
| Sensor / Accessory Port 1 | 1/8" NPT |
| Sensor / Accessory Port 2 | 1/8" NPT |
| Oil Filter Flange Inner Diameter | 2.00" (50.8mm) |
| Oil Filter Flange Outer Diameter | 3.00" (76.2mm) |
| Filter O-Ring Inner Diameter | 2.484" (63.10mm) |
| Filter O-Ring Outer Diameter | 2.762" (70.15mm) |
| Filter O-Ring Material | Viton® (FKM) |
Write Your Own Review
Customers Also Bought
