Remote Oil Filter Take-Off Adapter Plate, 13/16"-16 Filter Thread *Blemished*
$59.00
In stock
Ships Tomorrow
Ships Tomorrow
Part #
ENV-162-BLMS
* BLEMISHED UNIT * Part has faded/light engravings with scatches along top edge. Defects are cosmetic only.
- ADAPTER FITTINGS ARE NOT INCLUDED AND ARE SOLD SEPARATELY.
- Replaces your oil filter to allow for the installation of a remote oil filter system
- Features a 1/8" NPT port for a pressure or temperature sensor
- Outer surface is knurled for easy installation and removal by hand
- Standard -10AN O-ring boss ports are used for the inlet and outlet and optional adapter fittings are available for -8AN, -10AN and -12AN
- Robust square profile Viton O-ring for a reliable seal
Part # ENV-162-BLMS
* BLEMISHED UNIT * Part has faded/light engravings with scatches along top edge. Defects are cosmetic only.
-
ADAPTER FITTINGS ARE NOT INCLUDED AND ARE SOLD SEPARATELY.
Improved Racing's billet remote take-off plate replaces your oil filter to allow for the installation of a remote oil filter system.
This compact, high-flow spin-on adapter is available in four oil filter thread sizes for compatibility with most vehicles. It features a 1/8" NPT port for a pressure or temperature sensor. The outer surface is knurled for easy installation and removal by hand. High-flow female -10AN O-ring boss ports are used for the inlet and outlet and optional adapter fittings are available for -8AN, -10AN and -12AN lines. The Viton O-ring has a square profile, which maximizes sealing surface.
Remote oil filter systems allow for convenient access to your filter and permit the use of larger, higher-flowing oil filters. Please note a remote oil filter pedestal is required for mounting an oil filter when using this take-off adapter. Improved Racing thermostatic and non-thermostatic remote oil filter heads are available separately.
Features and Benefits
- CNC-machined from lightweight aluminum, Type II black anodized, laser-marked
- 1/8" NPT sensor port
- Two female -10AN O-ring boss fitting ports
- Robust square profile Viton O-ring for a reliable seal
Technical Specifications
- Filter thread: 13/16"-16
- Dimensions: 3.200" OD x 1.350" Thick
- Fitting Ports: 2 x -10AN SAE J1926 / MS16142 O-ring boss
- Material: 6061-T6 aluminum
- O-ring inner diameter: 2.484"
- O-ring outer diameter: 2.762"
- Sensor Ports: 1 x 1/8” NPT
- Sensors and oil ports are always, and only seeing filtered oil
- Plating: MIL-A-8625 Type II black anodized and laser-marked
- Weight: 6 oz
Includes
- 1x Universal billet remote oil filter take-off plate
- 1x square Viton O-ring
- 1x 1/8" NPT plugs with thread sealant
Optional Adapter Fittings Available in -8AN, -10AN, or -12AN
Applications
- Fits filter pedestals for filters up to 2.8" in gasket outer diameter.
- Compatible with oil filter nipples up to 1" (25.4mm) in length.
- Optional Spacer kit Part No. ENV-168 is required for Gen I-II SBC, Mk. 1-4 BBC, and Gen 5-6 BBC engines.
Be sure to check the filter thread for your vehicle before ordering. Guidelines for common applications are listed below.
| Application | Thread Size |
|---|---|
|
3/4-16 |
|
M20x1.50 |
|
13/16-16 |
|
M22x1.50 |
| Part # | ENV-162-BLMS |
|---|---|
| Brand | Improved Racing |
| Part Weight | 2.00 lb (0.90 kg) |
| Primary Material | 6061-T6 aluminum |
| Finish | Type II Anodized |
| Color | Black |
| Minimum Operating Temperature | -40°F (-40°C) |
| Maximum Operating Temperature | 302°F (150°C) |
| Inlet Port Size | -10AN O-Ring Boss Female |
| Outlet Port Size | -10AN O-Ring Boss Female |
| Maximum Operating Pressure | 300 psi (20.68 bar) |
| Max Recommended Flow Rate | Up to 20 GPM (76 LPM) |
| Fluid Compatibility | Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Power Steering Fluid Racing fuels Transmission fluid Water |
| Sensor / Accessory Port 1 | 1/8" NPT |
| Filter O-Ring Inner Diameter | 2.484" (63.10mm) |
| Filter O-Ring Outer Diameter | 2.762" (70.15mm) |
| Filter O-Ring Material | Viton® (FKM) |
Write Your Own Review
Customers Also Bought
