Remote Oil Filter Adapter for Gen 2 Ford 5.0 Coyote Engine
From $19.99 MSRP $149.00
To $35.79 MSRP $164.80
Free shipping on USA orders over $49
- Allows you to relocate your oil filter to a more practical location as well as accommodating the optional addition of an oil cooler
- Standard -10AN O-ring boss ports and adapters are available for -8AN, -10AN, and -12AN
- One 1/4" NPT port for sensors or turbo oil feed line
- One 3/8" NPT port for a turbo oil drain or catch can drain line
- Lifetime Warranty. Made in the USA.
CLEARANCE SALE! Only a few left!
Improved Racing's Ford 5.0 Coyote V8 remote oil filter adapter allows you to relocate your oil filter to a more practical location (most commonly the front bumper) as well as accommodating the optional addition of oil cooler. This adapter is designed to fit only 2015-2017 Gen 2 5.0 Coyote engines that have a relocated alternator, such as most supercharged applications. This adapter will interfere with the alternator in the factory location on the Mustang GT and may only be used in this vehicle if the alternator is relocated.
This bolt-on adapter replaces the factory oil filter mount and water-to-oil cooler. It features a 1/4" NPT sensor port and a 3/8" NPT drain port which can be used with a turbo or catch can drain line. The oil line ports are -10AN O-ring boss ports and adapters are available for -8AN, -10AN, and -12AN lines.
Features and Benefits
- Replaces the factory oil filter pedestal, allowing for a remote oil filter setup and the addition of an oil cooler.
- 1/4" NPT port for sensors or turbo oil feed line
- 3/8" NPT port for a turbo oil drain or catch can drain line
- -10AN (JIC/SAE) O-ring ports for oil lines
- CNC-machined 6061-T6 billet aluminum construction with MIL-A-8625 Type II black anodized finish
- Lifetime Warranty
- Made in the USA
Available in -8AN, -10AN, or -12AN
- 1x Remote oil filter adapter block
- 2x Viton (FKM) O-ring seals
- 3x Zinc-plated steel mounting screws
- 1x 1/4" NPT plug with thread sealant
- 1x 3/8" NPT plug with thread sealant
- 2x Black anodized -8AN, -10AN, or -12AN adapter fittings with Viton O-rings (OPTIONAL)
- Requires relocation of factory alternator (typically done for supercharged applications) if located just above the factory oil filter pedestal. For Mustang GT, see part number EFR-104.
- 2015-2017 (Generation 2) Ford 5.0 Coyote engines
- Note: Will NOT fit applications where the alternator is located just above the oil filter pedestal. Requires relocating the alternator. Use part number EFR-104 instead.
|Part #|| |
|Drop Ship Item|| |
|Special Order Item|| |
|Part Weight|| |
2.50 lb (1.13 kg)
Type II Anodized
|Minimum Operating Temperature|| |
|Maximum Operating Temperature|| |
|Inlet Port Size|| |
-10AN O-Ring Boss Female
|Outlet Port Size|| |
-10AN O-Ring Boss Female
|Maximum Operating Pressure|| |
300 psi (20.68 bar)
|Max Recommended Flow Rate|| |
Up to 20 GPM (76 LPM)
|Fluid Compatibility|| |
|Sensor / Accessory Port 1|| |
|Sensor / Accessory Port 2|| |