RaceFlux 1/4'' Barb Petcock Drainage Valve Assembly for AN Hose
From $12.90
To $31.80
Free shipping on USA orders over $99
Petcocks valves are convenient additions to fluid systems that must be frequently drained. They allow easy, convenient draining of oil coolers, radiators, head exchangers, etc.
This kit allows placing a petcock valve inline with AN fittings. The 1/4" barb allows a hose to be attached to minimize mess while draining. The drainage valve should always be placed on the lowest hose of the system to ensure all fluid can be drained.
Please note this kit does NOT come assembled. PTFE (Teflon) tape or sealant MUST be applied to the NPT threads before screwing the petcock valve into the fitting, or the assembly will leak.
Specifications
- Industry standard male and female AN / JIC flared 37-degree sealing surface
- Fitting machined from 6061-T6 aluminum and black anodized
- Fitting threads: AN male flare to AN female with 1/8'' NPT port on tee
- Petcock ports: 1/8'' NPT to 1/4'' barb
- Petcock material: brass with zinc-plated steel wingnut
Part # | VMF-XX |
---|---|
Brand | RaceFlux |
Color | Black |
Finish | Type II Anodized |
Size | 5/16'' Barb to -6AN Female |
Fitting Angle | Straight |
Port A Type | AN Flare Male 37º JIC |
Port B Type | AN Flare Female 37º JIC |
Connection B Gender | N/A |
Tee Port Type | NPT Female |
Maximum Operating Temperature | 302°F (150°C) |
Minimum Operating Temperature | -40°F (-40°C) |
Maximum Operating Pressure | 1000 psi (68.94 bar) |
Swivel | None on installation only |
Applications | Breather and vent lines Fuel (in-tank) Fuel (outside of tank) Gauge and sensor lines Hydraulics: high pressure (clutch - power steering - etc) Hydraulics: low pressure (return lines) Vacuum lines Other oil water and air systems |
Fluid Compatibility | Air and gas Alcohol Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitromethane Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |