Oil Filter Spacer for Recessed Filters, With Sensor Ports
$78.90
Part #
ENV-117 Configurator
Free shipping on USA orders over $99
- Oil filter spacer designed for recessed filters
- Features 2 x 1/8" NPT sensor ports
- Perfect for installing a sandwich plate on engines such as the FA20 and FA24
- Made in the USA
- Lifetime Warranty
Part # ENV-117 Configurator
Improved Racing's oil filter sandwich sensor adapter plate is a convenient way to add up to two sensors to your engine. This adapter plate also serves as a spacer when installing Improved Racing's oil cooler sandwich plates on engines that have a recessed filter, such as the FA20 (also known as Toyota 4U-GSE) and FA24 found on several Subaru and Toyota vehicles.
The sandwich plate features two 1/8" NPT ports for sensors, turbo feeds, etc. Note the maximum temp sensor probe length this unit can acommodate is 0.44". Plugs are included for both ports. The filter bung extension screw is made from 410 stainless steel. Please select the appropriate filter screw size for your engine when ordering (the FA20 and FA24 use a M20x1.50 filter thread).
Features and Benefits
- 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish
- O-ring inner diameter: 2.48"
- O-ring outer diameter: 2.76"
- 2x 1/8" NPT ports for sensors, turbo feed adapters, etc
- Acommodates sensor probes up to 0.44" in length (see dimensions)
- Filter bung extension screw available in 3/4-16", 13/16"-16, M20x1.50 and M22x1.50
- Filter bung extension screw is machined from hardened 410 stainless steel for excellent durability
- Made in USA
- Lifetime Warranty
Includes
- 1x Oil filter sandwich plate
- 1x Viton square-cut O-ring
Sold Separately
- 1x 410 stainless steel filter bung extension screw, available in 3/4-16", 13/16"-16, M20x1.50 and M22x1.50
Dimensions
| Part # |
A (Max Sensor Probe Length) |
Sensor Thread Size |
| ENV-117 | 0.44 in (11.2 mm) | 1/8" NPT |
Applications
- Ideal for use as a spacer when installing Improved Racing's oil filter sandwich plates on the Subaru FA20 and FA24 engines found in vehicles including:
- Scion FR-S / Toyota 86 / GT86, all model years
- Subaru BRZ, all model years
- Toyota GR86, all model years
- 2012-2014 Subaru Legacy 2.0GT DIT
- 2014-2018 Subaru Forester XT
- 2015-2021 Subaru WRX
- 2019+ Subaru Ascent
- 2020+ Subaru Legacy XT
- 2020+ Subaru Outback XT
- 2022+ Subaru WRX
- 2022+ Subaru Levorg / WRX Sportswagon / WRX GT
- Application note for vehicles above: If deleting the factory water to oil cooler found in later model years, you will need to install the factory filter screw bung (not included), Subaru Part # 15018AA090.
- Universal fitment in many other engines; please check the O-ring diameters and part diameter to compatibility with your oil filter pedestal and your oil filter.
Be sure to check the filter thread for your vehicle before ordering. Guidelines for common applications are listed below.
| Application | Thread Size |
|---|---|
|
3/4-16 |
|
M20x1.50 |
|
13/16-16 |
|
M22x1.50 |
| Part # | ENV-117 Configurator |
|---|---|
| Brand | Improved Racing |
| Part Weight | 10 oz (284 g) |
| Primary Material | 6061-T6 aluminum |
| Finish | Type II Anodized |
| Color | Black |
| Minimum Operating Temperature | -40°F (-40°C) |
| Maximum Operating Temperature | 302°F (150°C) |
| Maximum Operating Pressure | 300 psi (20.68 bar) |
| Max Recommended Flow Rate | Up to 20 GPM (76 LPM) |
| Fluid Compatibility | Air and gas Alcohol Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitromethane Nitrous Oxide Racing fuels Transmission fluid Vacuum Water |
| Sensor / Accessory Port 1 | 1/8" NPT |
| Sensor / Accessory Port 2 | 1/8" NPT |
| Oil Filter Flange Inner Diameter | 2.00" (50.8mm) |
| Oil Filter Flange Outer Diameter | 3.00" (76.2mm) |
| Filter O-Ring Inner Diameter | 2.484" (63.10mm) |
| Filter O-Ring Outer Diameter | 2.762" (70.15mm) |
| Filter O-Ring Material | Viton® (FKM) |
Write Your Own Review
Customers Also Bought
Related Products
Check items to add to the cart or
