Thermostatic Oil Cooler Sandwich Plate Gen 1-2 SBC & Mk. 1-6 BBC Engines, 212°F, -10AN

 In stock
Ships Tomorrow
Part #

Free shipping on USA orders over $49

  • Add an oil cooler to Gen 1-2 Chevy Small blocks and Mark 1-6 Chevy Big Blocks
  • Features a built-in oil thermostat to accelerate warm-up and prevent overcooling
  • -10AN Male ports
  • Includes 13/16"-16 410 stainless steel filter bung extension screws
  • Made in the USA
  • Lifetime Warranty

Improved Racing Warranty Badge

Part # EGM-126-T7

This thermostatic sandwich plate kit allows plumbing an oil cooler to Gen 1-2 SBC and Mk. 1-6 BBC engines. The kit includes an Improved Racing ENV-131-T7 thermostatic sandwich plate, the ENV-118 filter spacer and 410 stainless steel 13/16"-16 filter bung extension screws.

The sandwich plate will accommodate filters with gaskets up to 3.0" in outer diameter. See the Documentation tab for a list of recommended filters.

The sandwich plate's built-in thermostat bypasses the oil cooler until the oil has reached its minimum operating temperature. The thermostat valve is available in 180°F, 200°F and 212°F temperatures. This allows for quicker warm up times and prevents the oil cooler from over-cooling the engine during street driving.

Features -10AN make flare ports for plumbing an oil cooler.

Features and Benefits

  • 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish
  • Filter bung extension screws are machined from hardened 410 stainless steel for excellent durability
  • Made in USA
  • Lifetime Warranty


  • 1x ENV-131-T7 212°F oil coler sandwich plate
  • 1x ENV-118 oil filter adapter spacer for Gen 1-2 SBC and Mk 1-6 BBC engines
  • 2x Sealing O-rings
  • 2x 13/16"-16 stainless steel filter bung extension screw


  • Gen 1-2 Chevrolet Small Block Engines
  • Mark 1-6 Chevrolet Big Block Engines
  • Fits filters with gasket inner diameter from 2.0" up to maximum gasket outer diameter of 3.0"


Part #
Drop Ship Item
Special Order Item
Improved Racing
Primary Material
6061-T6 aluminum
Type II Anodized
Thermostat Stabilization Temp
215°F (101.7°C)
Thermostat Activation Temp
212°F (100°C)
Full Flow Temp
233ºF (112ºC)
Minimum Operating Temperature
-40°F (-40°C)
Maximum Operating Temperature
302°F (150°C)
Inlet Port Size
-10AN Male Flare
Outlet Port Size
-10AN Male Flare
Maximum Operating Pressure
300 psi (20.68 bar)
Max Recommended Flow Rate
Up to 20 GPM (76 LPM)
Fluid Compatibility
Air and gas
Engine oil
Ethanol-based fuels (E85+)
Ethanol/gasoline mixtures
Gear oil
Nitrous Oxide
Racing fuels
Transmission fluid
Oil Filter Flange Inner Diameter
2.00" (50.8mm)
Oil Filter Flange Outer Diameter
3.00" (76.2mm)
Filter O-Ring Inner Diameter
3.40" (86mm)
Filter O-Ring Outer Diameter
3.80" (96mm)
Filter O-Ring Material
Nitrile (NBR)
Write Your Own Review
You're reviewing:Thermostatic Oil Cooler Sandwich Plate Gen 1-2 SBC & Mk. 1-6 BBC Engines, 212°F, -10AN
Your Rating