Gen 5 Camaro SS & C6-C7 Corvette Factory Oil Cooler Delete Kit

$14.90
 In stock
Ships Tomorrow
Part #
EGM-681

Free shipping on USA orders over $99

Part # EGM-681
Customers Also Bought
C7 Corvette Factory Oil Cooler Delete Kit
C7 Corvette Factory Oil Cooler Delete Kit

As low as $7.90

C7 Corvette LT1, LT4, LT5 Oil Cooler Adapter
C7 Corvette LT1, LT4, LT5 Oil Cooler Adapter

As low as $159.00

MHX Series High-Efficiency Oil Cooler Configurator
MHX Series High-Efficiency Oil Cooler Configurator
Rating:
100%

As low as $349.00

Setrab Oil Cooler Configurator
Setrab Oil Cooler Configurator

As low as $110.00

2016+ Camaro SS/ZL1 & CTS-V Oil Cooler Adapter
2016+ Camaro SS/ZL1 & CTS-V Oil Cooler Adapter
Rating:
100%

As low as $159.00

2005-2013 C6 Corvette Performance Oil Cooler Kit
2005-2013 C6 Corvette Performance Oil Cooler Kit
Rating:
100%
As low as $1,199.00

The factory oil cooler on 5th generation V8 Camaros (2012-2015) and C6-C7 (2012-2019) Corvettes use engine coolant to cool the oil. This configuration can lead to insufficient oil cooling at the track or during spirited driving. The solution is to de-couple the oil cooling circuit from the engine coolant circuit and cool the oil with an air-to-oil cooler instead. Improved Racing has assembled a kit with the parts required to delete the factory water-to-oil cooler so that you can upgrade to an air-to-oil cooler.

The water to oil cooler can also be eliminated to simplify your street vehicle that may not need an oil cooler at all. This can also be useful for engine swaps that don't have provisions for a  water-to-oil cooler.

This kit includes only the components needed to cap off the coolant ports. To completely eliminate all oil cooling without adding an external oil cooler, you will also need an oil cooler bypass cover, sold separately.

This kit includes an upgraded, better-than-OEM coolant passage plug designed by Improved Racing. The coolant plug is made from zinc-plated steel and includes a bonded Dowty seal washer to prevent leaks. This coolant plug is a replacement for GM Part # 11611351 & 12561663 and will fit all Gen III, IV, and V Chevrolet small block engines.

The radiator barb cap and clamp is used to cap off unused port on the radiator. If your radiator doesn't have this extra barb, then all you need is the coolant port plug part # PLM-M28, which is also sold separately.

Includes

  • 1 x 5/8'' ID Rubber Radiator Barb Cap.
  • 1 x Worm-Drive Clamp.
  • 1 x Part # PLM-M28, GM Gen III-V LS/LT Coolant Plug, M28 x 1.25, w/ Dowty seal, upgrade to GM Part # 11611351 & 12561663.

Applications

  • Compatible with vehicles with oil pan mounted water-to-oil coolers, including:
    • 2012-2015 Chevrolet Camaro SS & ZL1.
    • 2009-2013 Chevrolet Corvette ZR1.
    • 2011-2013 Chevrolet Corvette Z06.
    • 2013 Chevrolet Corvette 427.
    • 2014-2019 Chevrolet Corvette, all models.
  • Coolant plug fits all GM Gen III, IV, and V small block engines.
  • Radiator barb cap fits any radiator with a 5/8" barb.
Specifications
Part #
EGM-681
Brand
Improved Racing
Vehicle Applications
Chevrolet Camaro (Gen 5)
V8 models
2012-2015
Chevrolet Camaro SS
2012-2015
Chevrolet Corvette (C6) Z06
2006-2013
Chevrolet Corvette (C6) ZR1
2009-2013
Chevrolet Corvette (C6) 427 Convertible
2013
Chevrolet Corvette (C7)
2014-2019
Chevrolet Corvette (C7)
2014-2016
Chevrolet Corvette (C7)
2017-2019
Write Your Own Review
You're reviewing:Gen 5 Camaro SS & C6-C7 Corvette Factory Oil Cooler Delete Kit
Your Rating
You May Also Like