Fire-Retardant Silicone Heat Shrink Seal, -10AN to -12AN Hoses, 3.0" Length

$2.99
 In stock
Ships Tomorrow
Part #
HHS-1035-76

Free shipping on USA orders over $49

  • Use to create a dustproof and waterproof seal on the ends of silicone-fiberglass heat protection sleeving
  • Fits -10AN and -12AN hoses with silicone-fiberglass heat sleeving installed
  • Fire retardant and resistant to most chemicals and automotive fluids
  • -58°F (-50°C) to 392°F (200°C) operating temp range
Part # HHS-1035-76

RaceFlux silicone heat shrink seals are used to create a dustproof and waterproof seal on the ends of our silicone-fiberglass heat protection sleeves (HS1 series heat sleeves). 

To install, slide over the hose and heat sleeving before installing the hose ends. Center the sleeve and then heat with a heat gun or blow dryer to shrink.

RaceFlux Silicone Heat Shrink Sleeve

Specifications

  • 35mm unshrunk I.D. fits -10AN and -12AN hoses with silicone-fiberglass heat sleeving installed
  • Shrinks down to a 20mm I.D. when heated
  • Fire retardant and resistant to most chemicals and automotive fluids
  • -58°F (-50°C) minimum continuous operating temps
  • 392°F (200°C) maximum continuous operating temps
  • Temperature required to shrink sleeving: 194°F - 338°F (90°C - 170°C)
  • Wall thickness before shrinking: 1.3mm +/- 0.3mm
  • Wall thickness after shrinking: 2.5mm +/- 0.3mm
Specifications
Part #
HHS-1035-76
Drop Ship Item
No
Special Order Item
No
Outer Layer Material
Silicone
Maximum Continuous Temperature Rating
392°F (200°C)
Maximum Intermittent Temperature
1
000°F (538°C)
Minimum Operating Temperature
-58°F (-50°C)
Inner Diameter (I.D.)
1.38" (35mm)
Outer Diameter (O.D.)
1.48" (37.6mm)
Heat Shield Length
3.0" (76mm)
Fits Max Hose Size
-10AN
-12AN
Manufacturer
RaceFlux
Write Your Own Review
You're reviewing:Fire-Retardant Silicone Heat Shrink Seal, -10AN to -12AN Hoses, 3.0" Length
Your Rating
You May Also Like