CCS Oil Catch Can Kit for Gen 6 Ford Explorer 3.0 TT V6 ST / Platinum

Rating:
100% of 100

As low as $299.00

Part #
CCS-FR-103 Configurator

Free shipping on USA orders over $99

  • Direct bolt-on catch can kits for Gen 6 Ford Explorer with 3.0 twin-turbo V6 EcoBoost engine.
  • Includes custom mounting brackets and custom made, emissions friendly, quick-connect lines.
  • Available for intake manifold circuit, turbo inlet circuit, or as a dual kit.
  • Keep octane reducing contaminats out of your intake and keep your engine clean.
  • A must for direct injection engines like the Ford EcoBoost.
  • 85-90% filtering efficiency of crankcase vapors.
  • Quick-turn, easy to service 7.0 fl oz (207 ml) reservoir.
  • Made in USA. Lifetime warranty.

Part # CCS-FR-103 Configurator
Customize CCS Oil Catch Can Kit for Gen 6 Ford Explorer 3.0 TT V6 ST / Platinum
 In stock
 In stock
 In stock
 In stock
 In stock
 In stock
 In stock
 In stock
 In stock
 In stock
 In stock
 In stock
 In stock

* Required Fields

Your Customization
CCS Oil Catch Can Kit for Gen 6 Ford Explorer 3.0 TT V6 ST / Platinum
CCS Oil Catch Can Kit for Gen 6 Ford Explorer 3.0 TT V6 ST / Platinum

In stock

Free shipping on USA orders over $99

$299.00

Summary
    Customers Also Bought
    CCS High Efficiency, Quick Release Oil Catch Can
    CCS High Efficiency, Quick Release Oil Catch Can
    Rating:
    96%

    As low as $249.00

    CCS Catch Can Bracket Nut
    CCS Catch Can Bracket Nut

    As low as $9.99

    High-Flow Engine & Transmission Oil Cooler Thermostat
    High-Flow Engine & Transmission Oil Cooler Thermostat
    Rating:
    100%

    As low as $199.00

    Remote Oil Filter Take-Off Adapter Plate
    Remote Oil Filter Take-Off Adapter Plate
    Rating:
    100%

    As low as $99.00

    High-Flow, Low Cracking Pressure Flapper Check Valve, -6 Body Size
    High-Flow, Low Cracking Pressure Flapper Check Valve, -6 Body Size
    As low as $79.00 Regular Price $109.00
    CCS Catch Can Lock Clip
    CCS Catch Can Lock Clip

    As low as $5.99

    Direct Fit for Ford Explorer ST & Platinum

    These kits are designed specifically for the Gen 6 Ford Explorer ST and Platinum editions with the 3.0 liter twin-turbo V6 engine. The kits include custom lines and a custom bracket set that bolts radiator support.

     

    The dual kit includes both the intake manifold kit (CCS-FR-101) and the turbo inlet kit (CCS-FR-102). We recommend installing both kits because the engine will ingest oil through both lines: the intake manifold line off-boost, and the turbo inlet line under boost. Save by purchasing both kits together in the dual kit.

    A Must Have for the 3.0 EcoBoost

    Ford's EcoBoost engines are direct injected, meaning fuel is injected directly into the combustion chamber, instead of the intake runners. While great for fuel economy, this means the intake port walls and valves will no longer be cleaned by the fuel. This results in excessive carbon build-up on the intake valves; a well documented problem with direct injected engines.

     

    While carbon build up will not ruin your engine, it will result in reduced performance in the long run. Vaporized oil in the intake manifold severely exacerbates the problem, so it's important to keep the air as clean as possible. Adding a good catch can to the crankcase ventilation system will help reduce this carbon build up and keep your engine cleaner.

     

    An Improved Oil Catch Can

    Improved Racing set out to design the best air-oil separating catch can we possibly could. We focused on a three simple design goals:

     

    1. Maximize efficiency: Separate as much vapor from crankcase blow-by fumes as possible with minimal restriction.
    2. Easy to use: The catch can should be simple and enjoyable to use in every aspect including mounting, draining, and cleaning.
    3. Durable: Virtually indestructible. Made from high-quality, reliable components. As with any Improved Racing product, nothing will vibrate loose or come apart under racing conditions.

     

    CCS Logo

    The result is the CCS (Catch Can, Sport).

     

     

    Highly Efficient Air-Oil Separation

     

    The CCS's design maximizes air-oil separation efficiency, resulting in a peak separation efficiency of 85-90%. For comparison, none of the competitor's catch cans we tested showed a peak efficiency of more than 60%. These results were achieved on our bench testing system at air flow rates of 0-4.0 CFM and vaporized oil injection rates of 0.20-0.30 grams of oil per minute.

     

    CCS-700 Catch Can Internals

    CCS Oil Catch Can Manifold Internals

    Tangential Entry Port
    • Air enters the catch can manifold tangentially, causing it to spin.
    • The centrifugal force of the spinning air forces heavier particles to the outside of the manifold, where they combine into larger droplets.
    Stainless Steel Filter
    • Multiple layers of stainless steel mesh of varying porosities are sintered together to comprise a single filter.
    • Effective filter rating is 100 microns. 
    • Filter is made from 316 stainless steel and is washable.
    Multiple O-Ring Seals
    • Three internal seals (shown in green) were used to ensure that no dirty air bypasses the filter. This is a major contributor to poor filtering efficiency and a very common problem we found in other catch cans.
    • One primary O-ring seals the top and bottom half of the catch can (shown in red).
    Anti-Splash-Back Funnel
    • The stamped aluminum funnel prevents fluid in the reservoir from splashing back onto the exit port (another common problem found in some catch cans).
    • The funnel features spiral grooves which serve two purposes:
      1. They help combine oil droplets so they drain quickly into the reservoir.
      2. CFD simulations have shown they help spiral the air, contributing to cyclonic separation.
    Bell Mouth Plenum
    • Extensive R&D went into designing the exit port plenum.
    • The bell mouth shaped sheds oil droplets collected on its outer perimeter, preventing fluid from exiting the catch can.
    • The large bell mouth opening slows air velocity before exiting the catch can and reduce the probability of any fluid becoming entrained and exiting the can.
    7.0 fl oz (207 ml) Reservoir
    • The 7.0 fl oz (207 ml) reservoir is more than sufficient for most engines and typically only needs draining with each oil change or after track days.

     

    No Sight Glass Needed

    Improved Racing's quick-release reservoir is so easy to remove that it eliminates the need for a sight glass. Just push up and twist an 1/8th turn to remove the reservoir and look inside. No more fumbling or endless unscrewing to remove the reservoir.

     

    No sight glass also means improved durability at higher operating temps. And no more trying to interpret a difficult-to-read sight glass to check your fluid level. Just look inside!

    CCS Catch Can 1/8 Turn Quick Release

    A powerful wave spring keeps the reservoir locked in place. A safety lock clip is also included just in case you want to be absolutely sure the reservoir cannot be removed.

    CCS Catch Can Reservoir

    Gen 6 Ford Explorer Specific Mounting Brackets

    Improved Racing's two-piece mounting bracket securely attaches to the radiator support using existing holes, providing plenty of space for removing and draining the can.

     

    The lower portion of each bracket is 3d printed from a carbon fiber and nylon composite material, which is high-strenth, UV-stable, can resist high temperatures, and is highly chemical resistant. The brackets perfectly contour the radiator support to prevent any damage to the vehicle's paint.

    Gen 6 Ford Explorer Catch Can Mounting Bracket

    Fast & Flexible Mounting Bracket System

    We made the mounting bracket easy to use and remove because some engines bays are tight. Remove the can in seconds by unscewing the green nut. Installing and positioning is just as quick and easy. If you need a little more leverage, just use a 5/8" or 16mm open end wrench on one of the nut's lobes.

    CCS Mounting Bracket System

     

    Positive Safety Lock Clip

    The CCS comes with a safety lock clip. It's peace of mind for crash protection or track events where a positive lock mechanism is required. Push to insert, pull to remove.

    CCS Safety Lock Clip

     

    Extensive Testing

    Development of the CCS happened over several years and included ANSYS Fluent CFD simulations, extensive bench tests, and on-vehicle street and track tests. Final prototype testing also included a 9-month beta testing program in collaboration with various road racers, drag racers, and drifters.

     

    CCS CFD Simulation

     

    Comparative testing included Improved Racing's prototypes and several catch cans from leading competitors. We ensured our catch can will beat the competition in filtration performance while maintaining a similar or lower pressure drop. Bench testing focused on maximizing efficiency at peak blow-by air flow rates of 3.7-4.0 CFM, where most other catch cans lack efficiency. The chart below (click to enlarge) shows some of our bench test results. Proprietary information and competitor's names have been redacted.

     

    CCS Catch Can Bench Testing Data Results

     

    Applications

     

    • 2020+ Ford Explorer ST
    • 2020+ Ford Explorer Platinum

     

    Dimensions

    CCS 7.0 fl oz Oil Catch Can Dimensions

    Specifications

     

    Port Size
    • -6AN O-ring boss inlet and outlet ports.
    Capacity
    • 7.0 fl oz (207 ml) reservoirs.
    Construction
    • Reservoir, manifold, bracket nut, and plenum are CNC-machined from 6061-T6 aluminum and MilSpec Type II anodized.
    • Filter is made from 316 stainless steel.
    • Anti-splash-back funnel and mounting brackets are stamped from aluminum to minimize weight.
    • Wave spring and hardware are made from stainless steel.
    Filtration
    • 100 micron, multi-layer 316 stainless steel mesh filter is suitable for all engines including vent-to-atmosphere setups.
    • Washable.
    Drain Port
    • No drain port. Reservoir must be removed for draining.
     Parts Included in Each Kit
    • CCS catch can with 7.0 fl oz reservoir.
    • Gen 6 Ford Explorer specific two-piece mounting bracket and hardware.
    • Bracket nus.
    • Safety lock clip.
    • Pre-made inlet and outlet lines with emissions friendly SAE J30 R9 hose and factory style quick connect fittings.
    Country of Manufacture
    • United States of America
    Warranty
    • Lifetime warranty
    Specifications
    Part #
    CCS-FR-103 Configurator
    Brand
    Improved Racing
    Primary Material
    6061-T6 aluminum
    Finish
    Type II Anodized
    Minimum Operating Temperature
    -40°F (-40°C)
    Maximum Operating Temperature
    302°F (150°C)
    Fluid Capacity
    7.0 fl oz (207 ml)
    Inlet Port Size
    -6AN O-Ring Boss Female
    Outlet Port Size
    -6AN O-Ring Boss Female
    Standards & Certifications
    Milspec Type II Anodizing
    O-Ring Boss Threads per SAE J1926-3 & ASME B1.1
    O-Ring Boss Threads per SAE AS5202
    Instruction Manuals
    Instruction manual for CCS series oil catch cans
    CCS-FR-101 Instruction Manual
    CCS-FR-102 Instruction Manual
    Write Your Own Review
    You're reviewing:CCS Oil Catch Can Kit for Gen 6 Ford Explorer 3.0 TT V6 ST / Platinum
    Your Rating
    You May Also Like