RaceFlux 3/4" ID Fire-Retardant Silicone Fiberglass Hose Sleeve, for -8AN & -10AN Hose

Rating:
100% of 100
Part #
HS1-12-XX
Length Price Stock Qty
$15.90
$51.90
$99.90
$258.00

Free shipping on USA orders over $99

  • 3/4" inner diameter. Suitable for -8AN hose (loose fit) up to -10AN hose (snug fit).

  • For easier installation, use with -10AN hose only if the length is shorter than 5 feet.

 

Part # HS1-12-XX
Customers Also Bought
Low-Profile Oil Cooler Thermostat for LS Engines
Low-Profile Oil Cooler Thermostat for LS Engines
Rating:
93%

As low as $209.00

Remote Engine & Transmission Oil Filter Mount, 2-Port
Remote Engine & Transmission Oil Filter Mount, 2-Port
Rating:
100%

As low as $128.90

Low Profile Remote Oil Filter Take-Off Adapter
Low Profile Remote Oil Filter Take-Off Adapter
Rating:
95%

As low as $167.90

Oil Cooler Adapter with Thermostat for BMW Engines
Oil Cooler Adapter with Thermostat for BMW Engines
Rating:
100%

As low as $299.00

MHX Series High-Efficiency Oil Cooler Configurator
MHX Series High-Efficiency Oil Cooler Configurator
Rating:
100%

As low as $329.00

RaceFlux fire-retardant silicone fiberglass sleeving is designed to protect hoses, wires and cables from intense heat and flame at continuous temperatures up to 500°F and intermittent temperatures up to 3,000°F. This type of sleeving is commonly used in aerospace and motorsport applications to protect critical components in the event of an engine compartment fire.

We recommend using this sleeve on any hoses that run in close proximity to engine headers or exhaust. The high abrasion resistance of silicone and fiberglass also makes this sleeve suitable for protecting its contents from abrasion.

RaceFlux's silicone sleeve is extremely flexible, non-conductive, and will not melt or become brittle with time. In the event of direct exposure to flame, the external silicone layer transforms into a protective, non-flammable silica (SiO2) coating while the fiberglass inner layer provides insulation from radiant heat.

Sold by the meter (3 feet) in continuous lengths. Maximum continuous length is 65 feet.

Also available in pre-cut rolls of 13 feet (4 meters), 26 feet (8 meters), and 65 foot (20 meter) rolls.

 

Specifications

  • 3/4" inner diameter. Suitable for -8AN hose (loose fit) up to -10AN hose (snug fit).

  • For easier installation, use with -10AN hose only if the length is shorter than 5 feet.
  • Operating Temperatures:

    • -65°F (-54°C) minimum continuous

    • 500°F (260°C) maximum continuous

    • 2,000°F (1,090°C) intermittent 15-20 minutes

    • 3,000°F (1,650°C) intermittent 15-30 seconds

  • Non-flammable.

  • Recommended cutting: scissors or a sharp blade.

  • Abrasion resistance: excellent.

  • Chemical resistance*:

    • Aromatic Solvents - 1

    • Alipahtic Solvents - 1

    • Chlorinated Solvents - 1

    • Weak Bases - 1

    • Strong Bases - 1

    • Salt Water - 1

    • Hydraulic Fluid (MIL-H-5606) - 1

    • Lubricating Oil (MIL-A-8243) - 1

    • De-Icing Fluid (MILA-8243) - 1

    • Strong Acids - 2

    • Strong Oxidants - 2

    • Esters/Keytones - 1

    • UV Light - 1

    • Petroleum - 1

    • Fungus (ASTM G-21) - 1

    • Salts - 1

 

* Key (1) No Effect, (2) Little Effect, (3) Affected, (4) More Affected, (5) Severely Affected

Specifications
Part #
HS1-12-XX
Outer Layer Material
Silicone
Inner Layer Material
Fiberglass
Maximum Continuous Temperature Rating
500°F (260°C)
Maximum Intermittent Temperature
2
000°F (1
090°C)
15-20 minutes
Minimum Operating Temperature
-65°F (-54°C)
Inner Diameter (I.D.)
3/4"
Heat Shield Length
Multiple
Fits Max Hose Size
-8AN
-10AN
Brand
RaceFlux
Write Your Own Review
You're reviewing:RaceFlux 3/4" ID Fire-Retardant Silicone Fiberglass Hose Sleeve, for -8AN & -10AN Hose
Your Rating
You May Also Like