Setrab’s ProLine COM products offer heavy-duty heat extraction and versatile plumbing opportunities for high-performance builds. The COM heat exchangers have thicker cores, and their robust construction allows them to handle higher internal pressures and chassis vibration.
This product utilizes an "I-flow" (cross-flow), single-pass design. The cross-flow circuit typically has fluid enter from the lower port and exit from the higher port. This helps to safely transport any air that might be trapped within after priming the oiling system.
There are four M8X1.0 bungs which can be used in conjunction with fabricated brackets to mount the product onto many applications where the space permits.
The M22X1.50 ports on the end-tanks will accept Setrab adapter fittings, for a variety of line sizes and fitting styles. The product is supplied with two M22x1.50 plugs for the unused ports.
Fittings are sold separately and can be found in the AN Fittings section.
Features and Benefits
Thicker cores, robust construction
Four optional flow configurations
Material: Aluminum Alloy
Heat Extraction: 45,000-66,000 btu/hr
Corrosion Endurance: 20 days according to SWAAT G85-94 A3
Made in Sweden
Core Width: 20.88'' (530 mm)
Total Width: 23.46'' (595 mm)
Core Height: 5.25'' (133 mm)
Total Height: 5.88'' (149 mm)
Weight: 6.3 lbs (2.86 kg)
Oil Capacity: 1.1 qt
Female Mounting Port Size: M22x1.50
Max Connection Tightening Torque: 29.5 ft-lb (40 Nm)
Inner Cleanliness: ISO 4406 16/14
General Dimensional Tolerances: ISO 2768-v
Working Pressure: 0-232 psi
Max Pressure: 363 psi
Burst Pressure: 725 psi
Pressure Test: 145 psi
Leak Test: 58 psi
Working Temperature: -40°C to 150°C (-40°F to 302°F)