Call Us 407-705-3054 Mon-Fri 10AM-6PM EST
 











Dual Inline Oil Sensor Manifold Block

[Part # ENV-150]

$54.00 Free Shipping Details
Fitting Size:
Qty:

Improved Racing's inline oil sensor manifold allows for easy installation of two 1/8" NPT oil sensors on your oil cooler (or transmission cooler) line. The flow-through design of the manifold makes it ideal for monitoring both oil pressure and oil temperature and can also be used to supply oil to a turbocharger. Two units can be used together - one before the cooler and one after - to monitor an oil cooler's efficiency and pressure drop.

The manifold features -10AN O-ring boss threads and a large diameter passage that allows for high volume flow and minimal pressure drop. Fittings are available to accommodate -06AN, -08AN, -10AN and -12AN lines, or 3/8" and 1/2" hose.

These universal sensor manifold blocks can also be used in laboratory and industrial applications. We use them in our own lab for testing oil coolers.

Features and Benefits

  • Universal sensor manifold accommodates two 1/8" NPT oil sensors or oil supply lines
  • High flow, low pressure drop design
  • -10AN female O-ring boss input and output ports
  • Mounting holes for bolts up to 8 mm (5/16") in diameter
  • 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish
  • Lifetime Warranty
  • Made in the USA


Available in -06AN, -08AN, -10AN, -12AN and 3/8 hose barb
Available with 3/8" or 1/2'' hose barb fittings or AN fittings in -06AN, -08AN, -10AN, or -12AN


Includes
  • 1x Universal sensor manifold
  • 2x Black anodized 3/8" or 1/2'' hose barb or -06AN, -08AN, -10AN, or -12AN adapter fittings with Viton O-rings (OPTIONAL)
  • 1x 1/8" NPT plug with thread sealant
Applications
  • Universal fitment on oil cooler lines. Appropriate for automotive, marine, laboratory and industrial use.

Do you own this product?

1-1 of 1 Reviews Sort By:
5.0
5.0


by Dillon N.
03/26/2019
I bought this on a whim , didn't see any reviews and figured I'd try it out. Planned to use it oil temp / pressure sensors in my oil filter relocation line routing. The sensors do not block the flow or stick out , the oil will flow through it like a regular line. The block of aluminum might even act like a little heat sink for the oil. The fittings that go in the manifold are O ring AN fittings. The sensors I used were a holley efi tranducer and autometer temp sensor. High quality stuff. U.S. made. Bald eagles.
1-1 of 1 Reviews
Customers who bought this product also purchased
RaceFlux AN Bulkhead Adapter Fitting and Nut, 90-degree
RaceFlux AN Bulkhead Adapter Fitting and Nut, 90-degree
1/2" ID Fire-Retardant Silicone Fiberglass Hose Sleeve
1/2" ID Fire-Retardant Silicone Fiberglass Hose Sleeve
Jiffy-tite 2000 Straight Valved Plug AN Hose End Fitting, -4AN
Jiffy-tite 2000 Straight Valved Plug AN Hose End Fitting, -4AN
Raceflux Self-Vulcanizing Silicone Tape
Raceflux Self-Vulcanizing Silicone Tape
Jiffy-tite 2000 Straight Valved Plug AN Female Fitting, -4AN
Jiffy-tite 2000 Straight Valved Plug AN Female Fitting, -4AN
RaceFlux AN Male Flare Y-Adapter
RaceFlux AN Male Flare Y-Adapter
Trap Doors for Oil Pans and Fuel Cells (4-Pack)
Trap Doors for Oil Pans and Fuel Cells (4-Pack)
Improved Racing Thermostatic Adapter Rebuild Kit
Improved Racing Thermostatic Adapter Rebuild Kit
Oil Filter Sandwich Plate with Thermostat for Oil Coolers
Oil Filter Sandwich Plate with Thermostat for Oil Coolers
Setrab 48-Row, Series 9 Oil Cooler
Setrab 48-Row, Series 9 Oil Cooler
RaceFlux AN Male Flare to AN Female w/ NPT Female Sensor Port
RaceFlux AN Male Flare to AN Female w/ NPT Female Sensor Port
Mocal Universal Thermostatic Sandwich Plate
Mocal Universal Thermostatic Sandwich Plate
 
 

Item(s) added to cart


 

Adding item(s) to cart...