Call Us 407-705-3054 Mon-Fri 10AM-6PM EST
 











Trap Doors for Oil Pans and Fuel Cells (4-Pack)

[Part # EMR-20X-KIT]

$29.00
Part No. Trap Door Width Price Qty
EMR-201-KIT 1.75" $29.00
EMR-200-KIT 2.5" $29.00

Building a custom oil pan or fuel cell? Improved Racing's purpose-built trap doors are the perfect solution. These trap doors are designed specifically for fluid baffling and are used in all of Improved Racing's oil pan baffles.

Sold in packs of 4. Also available to manufacturers in large volumes at wholesale pricing; please inquire.

Note: Open photo of trap door shows the trap door at the 60-degree stop position.

Specifications

  • Made from aluminum with a stainless steel pin and offset knuckle to smooth operation
  • Open dimensions - Width: 1.75" or 2.5", Height: 1.75"
  • Maximum recommended window dimensions: Width 1.55" (1.75" wide door), 2.3" (2.5" wide door), Height: 0.6" (see diagram under Instruction Manuals)
  • Features a 60-degree stop to prevent trap doors from sticking in the open position (see photo). This also allows for as little as 1" of clearance between the baffle walls and the pickup
  • Designed to hang slightly open when no G forces are applied, so that oil can flow freely into the oil pump pickup area
  • Attach using 1/8" rivets or screws with locking nuts. 1/8" aluminum solid body (aircraft) rivets are recommended
  • Lifetime Warranty
  • Made in the USA
Dimensions (in inches)

Do you own this product?

There are currently no product reviews.
Customers who bought this product also purchased
Remote Engine & Transmission Oil Filter Mount with Thermostat
Remote Engine & Transmission Oil Filter Mount with Thermostat
Basalt-Silica Exhaust Pipe and Catalytic Converter Heat Shield
Basalt-Silica Exhaust Pipe and Catalytic Converter Heat Shield
Setrab Remote Racing 13/16" Oil Filter Mount
Setrab Remote Racing 13/16" Oil Filter Mount
RaceFlux AN Male Flare to AN Male Flare w/NPT Female Sensor Port
RaceFlux AN Male Flare to AN Male Flare w/NPT Female Sensor Port
Mocal 19-Row, 235 Matrix Oil Cooler
Mocal 19-Row, 235 Matrix Oil Cooler
Billet Remote Oil Filter Take-Off Plate, 13/16"-16 Filter Thread
Billet Remote Oil Filter Take-Off Plate, 13/16"-16 Filter Thread
Dual Inline Oil Sensor Manifold Block
Dual Inline Oil Sensor Manifold Block
Aluminum Fiberglass Heat Reflective Adhesive Tape
Aluminum Fiberglass Heat Reflective Adhesive Tape
High-Flow 1 PSI Flapper Check Valve
High-Flow 1 PSI Flapper Check Valve
LS7 C6 Corvette Z06 Crank Scraper & Windage Tray Kit
LS7 C6 Corvette Z06 Crank Scraper & Windage Tray Kit
LS Oil Pan Long Bolt - 12554990
LS Oil Pan Long Bolt - 12554990
Single-Piece Replacement Oil Pan Gasket for GM LS Engines
Single-Piece Replacement Oil Pan Gasket for GM LS Engines
 
 

Item(s) added to cart


 

Adding item(s) to cart...