Call Us 407-705-3054 Mon-Fri 10AM-6PM EST
 










Camaro SS / G8 / SS / Caprice PPV Racing Oil Pan Baffle

[Part # EGM-205]

$199.00 Free Shipping Details
Replacement Gaskets:
Qty:

The GM LS family small blocks are prone to oil starvation at high Gs, especially at higher RPMs where oil aeration and windage is more prevalent. Proper oil pan baffling is critical for improving oil control and reducing oil starvation in these engines.

Improved Racing's baffles provide very effective, track-proven protection against oil starvation for road racing, drifting, autocross, drag racing and even off-roading and rock crawling. The baffle uses trap doors to keep oil around the pickup tube and provides vastly improved oil control over the stock baffle. This baffle is sufficient to prevent oil pressure drops at up to 1.4 sustained lateral G's in most vehicles.

The optional Oil pan gasket kit includes a new performance single-piece oil pan gasket (part number HGA-1001) and a OEM oil pickup tube O-ring. It is recommended that these components be replaced when installing a used oil pan.

Old part number EGM-1005.

Features and Benefits

  • Track-proven to prevent oil starvation at up to 1.4 sustained lateral G's
  • Directional trap door baffling completely encloses the oil pump pickup for maximum protection against oil starvation at high Gs
  • 100% bolt in, no welding necessary. This is a direct bolt-in replacement for the stock steel baffle in the stock oil pan
  • Baffle plate with drain-back slots help accelerate return of oil to the bottom of the sump while also preventing oil slosh and reducing oil consumption
  • Reduces the risk of oil starvation when oil levels are low
  • Works with the factory cast aluminum oil pan, which is considered a structural member of the engine block and is less prone to failure or leaking than aftermarket sheet metal pans
  • Light-weight aluminum construction
  • Solid body aircraft rivets employed for securing trap doors
  • Lifetime Warranty
  • Made in the USA
Test Data

The graph below plots oil pressures with the factory baffling (in red) versus the Improved Racing EGM-204 baffle (in black). A complete chart with oil pressure, RPM and lateral G-force plots can be seen in PDF format by clicking here, or as a JPG image by clicking here. A second chart that adds several additional logged parameters can be seen by clicking here.


Click to Enlarge


Applications

This product is designed for direct installation in the following vehicles:
  • 2006-Present Holden VE/VF Commodore
  • 2008-2009 Pontiac G8 GT & GXP
  • 2008-Present Vauxhall VXR8
  • 2010-2015 Chevrolet Camaro SS (LS3 and L99)
  • 2011-Present Chevrolet Caprice PPV V8
  • 2012-2015 Chevrolet Camaro ZL1
  • 2014-Present Chevrolet SS
  • Other vehicles equipped with GM oil pan part number 12640748
Part numbers for the corresponding oil pan and other required components for swaps are available on our LS Oil Pan Dimensions page.

Do you own this product?

1-1 of 1 Reviews Sort By:
5.0
5.0


by Donald H.
09/25/2017
Another outstanding product I had installed in my GPI forged/stroked LSA build! A must if you road race!
1-1 of 1 Reviews
Customers who bought this product also purchased
GM Gen III & IV LS Engine Billet Rear Galley Plug "Barbell"
GM Gen III & IV LS Engine Billet Rear Galley Plug "Barbell"
IWIS C5.R Timing Chain for Gen III and IV LS , Gen V LT
IWIS C5.R Timing Chain for Gen III and IV LS , Gen V LT
2010-2011 Camaro Factory Oil Cooler Delete Kit
2010-2011 Camaro Factory Oil Cooler Delete Kit
Windage Tray for 4.125" Stroke LSX - 19202609
Windage Tray for 4.125" Stroke LSX - 19202609
2012-2015 Camaro Factory Oil Cooler Delete Kit
2012-2015 Camaro Factory Oil Cooler Delete Kit
Universal Oil Accumulator Installation Kit, -08AN
Universal Oil Accumulator Installation Kit, -08AN
Canton Accusump EPC Valve, 20-25 PSI - 24-271X
Canton Accusump EPC Valve, 20-25 PSI - 24-271X
Oil Fill Tube with O-ring for LS Engine - 12559505
Oil Fill Tube with O-ring for LS Engine - 12559505
Billet Remote Oil Filter Take-Off Plate, M20x1.5 Filter Thread
Billet Remote Oil Filter Take-Off Plate, M20x1.5 Filter Thread
Oil Cooler Adapter O-Ring Replacement Kit
Oil Cooler Adapter O-Ring Replacement Kit
Complete LS Oil Pan Mounting Screw Kit
Complete LS Oil Pan Mounting Screw Kit
Windage Tray Lock-Nuts, GM LS Engines, Factory Main Studs
Windage Tray Lock-Nuts, GM LS Engines, Factory Main Studs
 
 

Item(s) added to cart


 

Adding item(s) to cart...