Call Us 407-705-3054 Mon-Fri 10AM-6PM EST
 











Remote Oil Filter & Cooler Adapter, 4.6 and 5.4 Ford Modular V8

[Part # EFR-100]

$149.00 Free Shipping Details
Fitting Size:
Radiator Hose:
Water Neck Size:
Qty:

Improved Racing's Ford Modular V8 remote oil filter adapter allows you to relocate your oil filter to a more practical location (most commonly the front bumper) as well as accommodating the optional addition of oil cooler.

This bolt-on adapter replaces the factory oil filter and water inlet manifold. It has two 1/4" NPT ports for sensors or oil line feeds. The engine oil ports are -10AN O-ring boss ports while the water port is a -16AN O-ring boss port. Factory radiator hoses of 1.5" and 1.75" are supported, as well as the option to use a -16AN adapter fitting for the engine's water inlet. Oil line adapters are available for -8AN, -10AN, and -12AN lines.

This adapter will fit any Ford Modular V8, however applications with a curved water neck on the factory manifold, such as the SN95 1996-2004 Ford Mustang GT, require Improved Racing's EFR-800 radiator hose. When selecting this optional radiator hose, you must also select the 1.75" hose barb adapter in the drop down. These two options make this filter relocation adapter a completely bolt on solution for the SN95 1996-2004 Mustang GT. Applications with a straight water neck on the factory manifold may reuse the factory radiator hose with minimal or no trimming required.

Features and Benefits

  • Replaces the factory oil filter and engine water inlet manifold, allowing for a remote oil filter setup and/or the addition of an oil cooler.
  • Two 1/4" NPT ports for sensors or turbo oil feed line
  • -10AN (JIC/SAE) straight thread O-ring ports for oil lines
  • -16AN (JIC/SAE) straight thread O-ring port for engine water inlet
  • CNC-machined 6061-T6 billet aluminum construction with MIL-A-8625 Type II black anodized finish
  • Lifetime Warranty
  • Made in the USA
Available in -08AN, -10AN, or -12AN
Available in -08AN, -10AN, or -12AN


Includes
  • 1x Remote oil filter adapter block
  • 3x Viton (FKM) O-ring seals
  • 4x Zinc-plated steel mounting screws
  • 2x 1/4" NPT plugs with thread sealant
  • 1x 1/4" NPT male to 1/4" NPT female 90-degree elbow for factory oil temp sensor
  • 2x Black anodized -08AN, -10AN, or -12AN adapter fittings with Viton O-rings (OPTIONAL)
  • 1x Black anodized 1.5" or 1.75" hose barb adapter for radiator hose (OPTIONAL)
  • 1x EFR-800 direct-fit silicone radiator hose for 1.75" hose barb adapter (OPTIONAL)
Applications
  • All Ford Modular V8 engines including the 1996-2010 Mustang GT, 1995-2010 F-Series trucks, 1992-2012 Crown Victoria / Mercury Grand Marquis, 1990-2011 Lincoln Towncar, 1996-2014 E-Series vans, 1997-2014 Expedition, 2000-2005 Excursion, 1998-2014 Lincoln Navigator, and others.
  • Note: If the water neck on your factory filter mount is curved (1996-2004 SN95 chassis Mustang GT) you must select the optional radiator hose and 1.75" hose barb adapter for a direct bolt-on installation. 2005-2010 Ford Mustang GT's may reuse the factory radiator hose but must select the optional 1.5" hose barb adapter.
  • Note: 2003-2004 Ford Mustang "Terminator" Cobra will require a custom radiator hose with double 90-degree bends to connect the factory thermostat housing to the EFR-100 adapter.

Do you own this product?

There are currently no product reviews.
Customers who bought this product also purchased
Remote Oil Filter Adapter for Gen 2 Ford 5.0 Coyote Engine
Remote Oil Filter Adapter for Gen 2 Ford 5.0 Coyote Engine
Remote Engine & Transmission Oil Filter Mount with Thermostat
Remote Engine & Transmission Oil Filter Mount with Thermostat
 
 

Item(s) added to cart


 

Adding item(s) to cart...