Improved Racing's remote oil filter mount features a built-in thermostat to save both space and cost. Intended for use with an oil cooler, the internal thermostat ensures engine oil reaches safe operating temperatures quickly and prevents over-cooling.
The thermostat valve is available in 185°F and 215°F temperatures for use with engine oil. It's also available in 165° and 145°F ratings for use with transmission fluid. In most conditions, it will maintain oil returning to the engine or transmission at these minimum temperatures.
This remote filter head features female -10AN O-ring boss threads and is available with optional fittings in 3/8" hose barb, -6AN, -08AN, -10AN, or -12AN (-10AN lines are recommended for most applications).
The large M22x1.50 filter screw is compatible with a wide range of filters of various sizes. For a list of compatible filters, CLICK HERE.
Features and Benefits
Reduces excessive engine wear and horsepower losses while improving gas mileage by accelerating engine warm up and preventing oil temperatures from dropping below optimal levels
Oil flows through filter first (thermostat does not bypass the filter)
Allows a small percentage (less than 10%) of fluid to continually circulate through the cooler to eliminate air pockets and prevent cold fluid trapped in the cooler from shocking the system
Large M22x1.50 filter thread is compatible with a wide range of filters
6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish
Female -10AN O-ring boss ports
Made in USA
Flow Diagram and Operation
8 Different Mounting Options
5 Different Fitting Sizes Available
Available with 3/8" hose barb, -06AN, -08AN, -10AN, or -12AN (-10AN is recommended for engine oil)
For use in remote oil filter applications where an engine oil cooler is also used. Not for use without an oil cooler.
1x Remote thermostat mount with integrated thermostat
1x Zinc-plated steel M22x1.50 filter thread bung
1x Aluminum mounting bracket and screws
4x Black anodized 3/8" hose barb or -06AN, -08AN, -10AN, or -12AN male adapter fittings with Viton O-rings (OPTIONAL)