Call Us 407-705-3054 Mon-Fri 10AM-6PM EST
 










C7 Corvette LT1, LT4 Oil Cooler Adapter with Thermostat

[Part # EGM-132]

$199.00 Free Shipping Details
Fitting Size:
Sensor Port Adapter:
Thermostat Temp:
Qty:

The C7 Corvette's water to oil heat exchanger is appropriate for a street car, but is wildly insufficient for track or performance use. Those looking to delete the factory heat exchanger and replace it with a high-efficiency air to oil cooler can use Improved Racing's thermostatic adapter to maintain precise control of oil temperatures.

Improved Racing's adapter features a built-in thermostat that automatically bypasses the cooler until the oil reaches operating temperature. No need to worry about over-cooling the oil or long warm-up times!

The adapter features standard female -08AN O-ring boss ports that accept optional male adapter fittings for -08AN, -10AN or -12AN lines.

Two interchangeable OUT ports provide flexibility in line routing. A plug is included for the unused port, or an optional sensor adapter fitting may be used for an 1/8" NPT or M12x1.5 sensor. The extra port can also be used as a turbo oil feed or for plumbing an oil accumulator.

Features and Benefits

  • 100% bolt-on in place of the factory heat exchanger, just above the oil filter
  • Built-in thermostat helps reduce engine wear and horsepower losses by preventing oil temperatures from dropping below optimal levels
  • Maintains a minimum oil temperature of 180°F (82°C), 200°F (93°C), or 212°F (100°C) in most conditions (select preferred temperature from the drop down above)
  • Rebuildable - just send it back to us and we will replace the thermal actuator, spring and seals
  • Extra OUT port can be used for a sensor, turbo oil feed line, or oil accumulator
  • Retains stock oil filter location
  • Oil exiting the adapter is filtered oil
  • 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish
  • High-temp Viton seals
  • Lifetime Warranty
  • Made in the USA
Available in -08AN, -10AN, or -12AN
Available in -08AN, -10AN, or -12AN

Dimensions
EGM-132 Dimensions
Includes
  • 1x Thermostatic oil cooler adapter block for LT1/LT4 engines
  • 1x Gasket
  • 2x Zinc-plated steel mounting screws
  • 1x -8AN plug
  • Detailed installation instructions
Optional Add-Ons
  • 2x Black anodized -08AN, -10AN, or -12AN adapter fittings with Viton O-rings
  • 1x 1/8" NPT or M12x1.5 sensor port adapter fitting
Installation Notes
  • Note: This oil adapter is designed for O-ring boss fittings with a straight thread length of 0.500" or less. We recommend using our fittings in order to guarantee proper fitment and seal.
  • We recommend using a straight hose end fitting for the OUT port and a 90-degree hose end fitting for the IN port. For additional clearance, use our low profile hose end fitting on the IN port (part number DO-090-08-08 (-8AN lines) or DO-090-10-08 (-10AN lines). Note only one O-ring boss adapter fitting is needed when using this low-profile hose end.
Applications
  • 2014+ Chevrolet Corvette (C7), all models
  • May also fit other vehicles using the Gen V Chevrolet small block LT1, LT4, LT5, L86 and L83 engines
  • Does NOT fit the 2016+ Camaro SS oil pan

Do you own this product?

There are currently no product reviews.
Customers who bought this product also purchased
MHX Series Universal Single-Point Mount L-Bracket
MHX Series Universal Single-Point Mount L-Bracket
MHX Series Oil Cooler Universal Single-Point Mount U-Bracket
MHX Series Oil Cooler Universal Single-Point Mount U-Bracket
MHX-245C C6 Corvette High-Efficiency Triple-Pass Oil Cooler
MHX-245C C6 Corvette High-Efficiency Triple-Pass Oil Cooler
MHX Series Universal Single-Point Mount L-Bracket With Nutserts
MHX Series Universal Single-Point Mount L-Bracket With Nutserts
MHX-514 High-Efficiency Oil Cooler
MHX-514 High-Efficiency Oil Cooler
RaceFlux Low-Profile 90-degree AN Male Flare to Male ORB Union
RaceFlux Low-Profile 90-degree AN Male Flare to Male ORB Union
Coolant Port Plug for GM LT Engine - 11611351
Coolant Port Plug for GM LT Engine - 11611351
RaceFlux Lightweight Viton Racing Hose for Fuel and Oil, -8AN
RaceFlux Lightweight Viton Racing Hose for Fuel and Oil, -8AN
Setrab Banjo Fittings for M22x1.5 Ports
Setrab Banjo Fittings for M22x1.5 Ports
5/8" ID Fire-Retardant Silicone Fiberglass Hose Sleeve
5/8" ID Fire-Retardant Silicone Fiberglass Hose Sleeve
2012-2015 Camaro Factory Oil Cooler Delete Kit
2012-2015 Camaro Factory Oil Cooler Delete Kit
LS7 Dry Sump Oil Pan to -12AN Hose Adapter Kit - 25534412
LS7 Dry Sump Oil Pan to -12AN Hose Adapter Kit - 25534412
 
 

Item(s) added to cart


 

Adding item(s) to cart...