Call Us 407-705-3054 Mon-Fri 10AM-6PM EST
 











MHX-220 High-Efficiency Oil Cooler

[Part # MHX-220]

$279.00 Free Shipping Details
Fitting Size:
Qty:

Improved Racing's Motorsport Heat Exchanger (MHX) series oil coolers are the result of several years of development and testing to create a highly efficient oil cooler. These coolers were perfected through extensive testing on our in-house heat exchanger test system and wind tunnel.

The MHX-220 oil cooler is a dual-pass oil cooler that matches heat rejection rates of larger, heavier stacked-plate coolers made by brands such as Setrab, Mocal, and Earl's. Compared to a typical 34-row, 4.5" wide core stacked plate cooler, this cooler is 13% smaller overall and 7% lighter, yet holds more fluid volume. The core is 23% thinner and has a lower row and fin density, allowing more air to flow through the cooler to other heat exchangers (such as a radiator) behind it.

A major design focus was to minimize welds and brazings to make these coolers stronger, lighter, and less prone to leaks. All four end caps are single-piece CNC-machined billet aluminum. The rows consist of aluminum tubes stuffed with turbulators to maximize heat transfer. The dual-pass design also maximizes heat transfer efficiency.

There are four M8x1.25 mm mounting holes, one on each corner of the cooler. Improved Racing has designed lightweight aluminum brackets (sold separately) to make mounting your cooler as easy as possible. The brackets feature integrated rubber isolators that protect the cooler from excessive vibration and extend the life of the cooler.

The MHX 200-series coolers feature -10AN female O-ring boss ports on the same side of the end tank for convenient line routing. Optional fittings are available in -6AN, -8AN, -10AN, and -12AN JIC male flare threads.

All Improved Racing oil coolers are pressure tested to 175 PSI to ensure no leaks and are rated for continuous operation at 150 PSI. Our coolers are made in the USA and backed by our Lifetime Warranty.

CNC-machined billet aluminum tank end caps with machined mounting holes on all four corners
CNC-machined billet aluminum tank end caps with machined mounting holes on all four corners

Available in -06AN, -08AN, -10AN, -12AN and 3/8 hose barb
3/8" or 1/2'' hose barb fittings or AN fittings in -06AN, -08AN, -10AN, or -12AN are free with the purchase of a cooler

Vibration isolating mounting brackets available (sold separately)
Vibration isolating mounting brackets available (sold separately)

Features and Benefits

  • Compact, lightweight design is 13% smaller, 7% lighter, and has 100% more fluid capacity than a 34-row, 4.5" wide core stacked plate oil cooler
  • Matches heat rejection rates of larger 34-row stacked plate oil coolers
  • Dual-pass design
  • Higher pass-through airflow rate than stacked plate coolers
  • Female O-ring boss -10AN ports on same side of end tank
  • 4x flanged M8 mounting screws are included
  • Lifetime Warranty
  • Made in the USA
Dimensions and Specifications



Part # Rows A (Height) Weight Capacity Mounting Holes
MHX-20663.25 in (82.55 mm)1.0 lbs (0.45 kg)0.23 Qt (0.25 L)M8 x 1.25
MHX-214146.94 in (176.3 mm)TBD0.60 Qt (0.57 L)M8 x 1.25
MHX-220209.73 in (247.1 mm)2.5 lbs (1.1 kg)0.95 Qt (0.90 L)M8 x 1.25
MHX-2454521.20 in (538.48 mm)5.1 lbs (2.3 kg)1.95 Qt (1.85 L)M8 x 1.25
MHX-245C4521.20 in (538.48 mm)5.4 lbs (2.6 kg)1.95 Qt (1.85 L)C6 Corvette Mounts, M8 x 1.25

Do you own this product?

There are currently no product reviews.
Customers who bought this product also purchased
Mocal Universal Thermostatic Sandwich Plate
Mocal Universal Thermostatic Sandwich Plate
Dual Inline Oil Sensor Manifold Block
Dual Inline Oil Sensor Manifold Block
 
 

Item(s) added to cart


 

Adding item(s) to cart...