Call Us 407-705-3054 Mon-Fri 10AM-6PM EST
 











RaceFlux 3/4" ID Stitched Aluminized Kevlar Hose Sleeve

[Part # HS2-12]

$18.00
Length:
Qty:

RaceFlux's aluminumed Kevlar aramid sleeve is now available with double-stitched sections so that it can easily be cut to size without frayed ends or unraveling! Sleeves can be cut into sections in multiples of 13 inches (33 cm) with a pair of scissors.



The Kevlar aramid layer is now also thinner and more flexible, while still offering excellent protection against heat and abrasion.

This reflective aluminized sleeve is designed to protect hoses, wires and cables from continuous radiant heat exposure up to 500°F and short-term exposure up to 1,000°F. This light-weight sleeve reflects approximately 90% of radiant heat energy to protect sensitive components from heat exposure. The high-strength Kevlar aramid fiber layer provides excellent abrasion resistance and flame resistance without the undesirable properties and handling hazards of fiberglass.

The hook and loop closure allows for easy installation over existing hoses and wiring harnesses, and can be easily removed for further adjustments. We recommend using this sleeve in applications where removable heat protection is desired or where access to the end of the hoses or wiring loom is not possible. We do not recommend this sleeve in applications where periodic exposure to flames may occur. While the Kevlar layer offers excellent fire resistance, the aluminized layer will melt quickly when directly exposed to flames.

Sold in 39 inches (100 cm) or 10 foot (305 cm) lengths and can be cut into sections in multiples of 13 inches (33 cm) with a pair of scissors without frayed or unraveled ends.

Specifications

  • 0.75" ID (suitable for up to -8AN hose)
  • Overall length: 39 inches (100 cm) or 10 feet (305 cm)
  • Double-stitched every 13 inches (33 cm) to prevent unraveling when cut
  • Construction: Aluminum outer layer, Kevlar aramid fiber inner layer, serge edge stitching, split with hook and loop closure
  • Operating temperatures:
    • -65°F (-54°C) minimum continuous
    • 500°F (260°C) maximum continuous
    • 1,000°F (538°C) intermittent
  • Non-flammable
  • Recommended cutting tools: scissors
  • Abrasion resistance: excellent

Do you own this product?

There are currently no product reviews.
Customers who bought this product also purchased
Aluminum Fiberglass Heat Reflective Adhesive Tape
Aluminum Fiberglass Heat Reflective Adhesive Tape
C6 / C7 Corvette Oil Cooler Heat Shield
C6 / C7 Corvette Oil Cooler Heat Shield
Trap-Door Baffling Inserts for Chevrolet C5 Corvette Oil Pan
Trap-Door Baffling Inserts for Chevrolet C5 Corvette Oil Pan
MHX-514 High-Efficiency Oil Cooler
MHX-514 High-Efficiency Oil Cooler
Adel High Temp Cushioned Mounting Clamps for AN Hose and Tubing
Adel High Temp Cushioned Mounting Clamps for AN Hose and Tubing
RaceFlux Billet Aluminum AN Hose Separator
RaceFlux Billet Aluminum AN Hose Separator
Front Timing Cover Gasket for LS Engines -  12633904
Front Timing Cover Gasket for LS Engines - 12633904
LS Engine Oil Pump Pickup Tube Brace / Clamp
LS Engine Oil Pump Pickup Tube Brace / Clamp
Rear Cover Gasket for LS Engines - 12639249
Rear Cover Gasket for LS Engines - 12639249
Oil Pan Gasket for LS-Series Engine - 12612350
Oil Pan Gasket for LS-Series Engine - 12612350
Intake Manifold Gasket Set for LS1, LS6, LS2 - 12533587
Intake Manifold Gasket Set for LS1, LS6, LS2 - 12533587
Clutch Slave Cylinder LS1 Camaro / Firebird (F-Body) - 24264182
Clutch Slave Cylinder LS1 Camaro / Firebird (F-Body) - 24264182
 
 
 

Item(s) added to cart


 

Adding item(s) to cart...