|
|
Fireflex 7/8" (-10AN) Fire-Retardant Hose Sleeving[Part # FF-10]
|
FireFlex silicone jacketed fiberglass sleeving is the choice of professionals in motor racing and other industries where protection from constant temperatures approaching 500F is mandatory. In aviation, almost every engine - turbine, turboprop or piston; civilian and military - uses FireFlex to protect critical hoses and wiring in the event of an engine compartment fire.
FireFlex fiberglass/silicone sleeving is engineered to protect
plumbing (hoses), cables and wire harnesses from damage due
to exposure to extreme heat, open flame, molten splash and
welding sparks. The thick, high temperature fiberglass sleeve
is jacketed with a non-permeable, heavy silicone coating that is
flexible enough to follow tight radius curves, resists all automotive chemicals and solvents, and provides a substantial level of
abrasion and puncture protection.
FireFlex is completely non-conductive, will not melt, delaminate,
become brittle or support combustion under normal conditions, and
provides a professional level solution to thermal protection needs in
any application.
Specifications
- For -10AN hose (7/8" ID)
- Operating Temperatures: Minimum Continuous -65F/-54C, Maximum Continuous 500F/260C
- Melt Temperature: 2.048F/1,120C
- Flammability Rating: Non Flammable
- Recommended Cutting: Scissor of Knife
- Wall Thickness: .072"
- Abrasion Resistance: Extremely High
- Chemical resistance*:
- Aromatic Solvents - 1
- Alipahtic Solvents - 1
- Chlorinated Solvents - 1
- Weak Bases - 1
- Strong Bases - 1
- Salt Water - 1
- Hydraulic Fluid
(MIL-H-5606) - 1
- Lubricating Oil (MIL-A-8243) - 1
- De-Icing Fluid (MILA-8243) - 1
- Strong Acids - 2
- Strong Oxidants - 2
- Esters/Keytones - 1
- UV Light - 1
- Petroleum - 1
- Fungus (ASTM G-21) - 1
- Salts - 1
* Key (1) No Effect, (2) Little Effect, (3) Affected, (4)
More Affected, (5) Severely Affected
|
Call Us
407-494-3278 Mon-Fri 10AM-6PM EST
