C7 Corvette Factory Oil Cooler Delete Kit
As low as $7.90
Free shipping on USA orders over $99
- Use this page to configure a kit to delete the factory oil cooler in favor of an aftermarket oil cooler, or to delete the factory oil cooler completely.
The factory water-to-oil cooler systems used in the C7 Corvette are often overwhelmed during spirited use which can lead to high coolant temps, and inevitably, high oil temps. In order to maximize heat extraction, Improved Racing has assembled a kit that eliminates the factory water-to-oil cooling system so that the vehicle may be fitted with a more efficient air-to-oil cooling system using the Improved Racing EGM-132 or EGM-137 thermostatic oil cooler adapter block (sold separately).
The kit comes with everything needed to cap off or bypass the factory water-to-oil cooler. If you want to run no oil cooler at all, add the full delete kit (oil cooler bypass cover) as well.
Please see the application descriptions below to make sure you are selecting the right kit.
FO-10 Union Fitting
Applications:
- 2014-2016 (C7) Corvette without Axuliary Radiator - Select this option if using the auxiliary radiator with the 2014-2016 (C7) Corvette. If the auxiliary radiator is being used, the coolant lines connected to the factory oil cooler must be looped together with this fitting.
- This option can also be chosen even if not using the auxiliary radiator, so choose this option if you plan to add it later.
Parts Included:
- FO-10 - Straight female O-ring boss union in -10AN
EC7-681 Kit
Applications:
- 2014-2016 (C7) Corvette without Axuliary Radiator - If no auxliary radiator is used, the engine block coolant passage can be plugged and the radiator connection capped off completely using this kit
- 2017-2019 (C7) Corvette (All Models) - These years use a different hose routing for the auxiliary radiator which is separate from the factory oil cooler line. For these model years, the oil factory water-to-oil cooler line can be capped off and eliminated completely using this kit.
Parts Included:
- 1 x 5/8'' ID Rubber Coolant Barb Cap
- 1 x Worm-Drive Clamp
- 1 x GM Part # 11611351 - M27 x 1.00 mm coolant plug
EC7-680 / EGM-110 / EGM-111 Full Delete Kit
Applications:
- 2014-2019 (C7) Corvette (all models) - This kit is used to completely cap off the oil cooler bypass port, if no cooler will be used at all
Parts Included:
- Oil cooler block-off / bypass cover plate and necessary hardware
Part # | EC7-681 Configurator |
---|---|
Brand | Improved Racing |
Vehicle Applications | Chevrolet Corvette (C7) 2014-2019 |