Call Us 407-705-3054 Mon-Fri 10AM-6PM EST
 











Blemished - C7 Corvette Oil Cooler Adapter with 180F Thermostat

[Part # EGM-132-T4]

$199.00 $159.99 Free Shipping Details
Fitting Size:
Sensor Port Adapter:
Qty:

Please Note: "Blemished" items are parts that exhibit minor aesthetic defects such as scratches, dents, minor machining defects, or laser engraving defects that do not affect the functionality of the part. "Blemished" items are fully backed by the factory warranty. Photos shown are not of actual item. Photos of a specific item can be provided upon request.

For this specific product, the housing sustained minor scratches/blemishes prior to assembly. The product itself has never been used and is in mechanically perfect condition.


The C7 Corvette's water to oil heat exchanger is appropriate for a street car, but is wildly insufficient for track or performance use. Those looking to delete the factory heat exchanger and replace it with a high-efficiency air to oil cooler can use Improved Racing's thermostatic adapter to maintain precise control of oil temperatures.

Improved Racing's adapter features a built-in thermostat that automatically bypasses the cooler until the oil reaches operating temperature. No need to worry about over-cooling the oil or long warm-up times!

The adapter features standard female -08AN O-ring boss ports that accept optional male adapter fittings for -8AN, -10AN or -12AN lines.

Two interchangeable OUT ports provide flexibility in line routing. A plug is included for the unused port, or an optional sensor adapter fitting may be used for an 1/8" NPT or M12x1.5 sensor. The extra port can also be used as a turbo oil feed or for plumbing an oil accumulator.

Features and Benefits

  • 100% bolt-on in place of the factory heat exchanger, just above the oil filter
  • Built-in thermostat helps reduce engine wear and horsepower losses by preventing oil temperatures from dropping below optimal levels
  • Maintains a minimum oil temperature of 180°F (82°C) in most conditions
  • Rebuildable - just send it back to us and we will replace the thermal actuator, spring and seals
  • Extra OUT port can be used for a sensor, turbo oil feed line, or oil accumulator
  • Retains stock oil filter location
  • Oil exiting the adapter is filtered oil
  • 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish
  • High-temp Viton seals
  • Lifetime Warranty
  • Made in the USA
Available in -8AN, -10AN, or -12AN
Available in -08AN, -10AN, or -12AN

Dimensions
EGM-132 Dimensions
Includes
  • 1x Thermostatic oil cooler adapter block for LT1/LT4 engines
  • 1x Gasket
  • 2x Zinc-plated steel mounting screws
  • 1x -8AN plug
  • Detailed installation instructions
Optional Add-Ons
  • 2x Black anodized -08AN, -10AN, or -12AN adapter fittings with Viton O-rings
  • 1x 1/8" NPT or M12x1.5 sensor port adapter fitting
Installation Notes
  • Note: This oil adapter is designed for O-ring boss fittings with a straight thread length of 0.500" or less. We recommend using our fittings in order to guarantee proper fitment and seal.
  • We recommend using a straight hose end fitting for the OUT port and a 90-degree hose end fitting for the IN port. For additional clearance, use our low profile hose end fitting on the IN port (part number DO-090-08-08 (-8AN lines) or DO-090-10-08 (-10AN lines). Note only one O-ring boss adapter fitting is needed when using this low-profile hose end.
Applications
  • 2014+ Chevrolet Corvette (C7), all models
  • May also fit other vehicles using the Gen V Chevrolet small block LT1, LT4, L86 and L83 engines
  • Does NOT fit the 2016+ Camaro SS oil pan

Do you own this product?

There are currently no product reviews.
 
 
 

Item(s) added to cart


 

Adding item(s) to cart...